RUNXIN F116Q3
RUNXIN F116Q3
The Runxin F116Q3 is an automatic multi-port control valve designed primarily for water softening and filtration systems.
It features a flow rate of 5 m³/h and is categorized as a "meter type" (volumetric) valve, meaning it triggers regeneration based on the volume of water processed.
Specification
- Valve Type: Automatic Softener Valve
- Flow Capacity: 5 m³/h
- Mount Type: Top Mount
- Regeneration Type: Down-flow / Meter Type
- Inlet/Outlet Size: 1" Male Thread
- Drain: 1/2" Female Thread
- Brine Line: 3/8 " Male Thread
- Water Turbidity: <5 FTU
- Working Pressure: 0.15 - 0.6 MPa (2 - 6 bar)
- Water Temperature: 5°C - 50°C (41°F - 122°F)
- Mounting Base: 2.5"-8NPSM
- Riser Pipe: 1.05" Outside Diameter
- Filter Tank: 6" - 18"
Primary Applications
- Residential Softening: For homes requiring high flow rates and efficient salt usage.
- Boiler Feed Water: Softening water to prevent scale buildup in heating systems.
- RO Pretreatment: Removing hardness to protect sensitive Reverse Osmosis membranes.
- Ion Exchange Systems: General demineralization or iron removal setups.
Operation Cycles
- Service: Standard water softening mode.
- Backwash: Flushes out debris and loosens the resin bed.
- Brine & Slow Rinse: Draws salt water to regenerate the resin.
- Brine Refill: Adds water back to the brine tank for the next cycle.
- Fast Rinse: Settles the resin and removes any remaining brine.
Key Features
- Regeneration Cycles: The valve automatically manages the five stages of filter/softener regeneration: Service, Backwash, Brine & Slow Rinse, Fast Rinse, and Brine Refill.
- Flow Meter: The integrated flow meter measures water usage and triggers regeneration only when a preset volume of water has been treated, optimizing salt and water efficiency.
- Manual Regeneration: You can initiate an immediate regeneration cycle by simply pressing the "Manual/Return" button when needed (e.g., before a period of high water usage).
- User Interface & Safety:
- Button Lock: The keypad automatically locks after 60 seconds of inactivity to prevent accidental setting changes. It can be unlocked by holding the "Up" and "Down" buttons for 5 seconds.
- Power-Outage Memory: If a power outage lasts more than 3 days, the display will flash "12:12" to remind you to reset the time of day, but your other programmed settings are retained.
- Auto-Rotation: Upon being re-energized, the valve will automatically rotate to its correct operating position.
